|
Post by madphil101 on Jan 31, 2024 7:56:16 GMT
I forgot to record the stick before I circulated it. Is there an AOS folder?
|
|
|
Post by Admin on Jan 31, 2024 10:03:51 GMT
No AOS
|
|
|
Post by Nemesis on Feb 4, 2024 11:00:47 GMT
Just google searched And i cant believe, that people been asking for teh Gur Panther in their own box for three years and Mantic still havnt done it yet
|
|
|
Post by Balgin on Feb 6, 2024 3:42:43 GMT
I've been through the tub.
If I don't lose or break any parts then there's enough in here to make exactly 16 archers, that's 8 of each pose. This number may go down as I work on them. Of those 16 one will be missing half her right foot but that's easily hidden. I need to take a closer look at the right hands of the one in the more hunched pose as some of them look dodgy so that may reduce the overall number. I'll want to wait 'til I've got daylight on my side to check those. Some of the plaits for the more upright pose might break when removing them from the tab but that's something we can be more flexible on. I'll wait 'til I get some glue then get to work on them.
|
|
|
Post by cthulhu on Feb 6, 2024 10:50:06 GMT
I've been through the tub. If I don't lose or break any parts then there's enough in here to make exactly 16 archers, that's 8 of each pose. This number may go down as I work on them. Of those 16 one will be missing half her right foot but that's easily hidden. I need to take a closer look at the right hands of the one in the more hunched pose as some of them look dodgy so that may reduce the overall number. I'll want to wait 'til I've got daylight on my side to check those. Some of the plaits for the more upright pose might break when removing them from the tab but that's something we can be more flexible on. I'll wait 'til I get some glue then get to work on them. What was missing? The ponytails I wouldn’t even attempt as I failed every time I tried to remove them? I am surprised that I had an over 50% failure on the bows and arrows? It didn’t seem that many. The components are ultra thin
|
|
|
Post by Balgin on Feb 6, 2024 12:30:25 GMT
I've been through the tub. If I don't lose or break any parts then there's enough in here to make exactly 16 archers, that's 8 of each pose. This number may go down as I work on them. Of those 16 one will be missing half her right foot but that's easily hidden. I need to take a closer look at the right hands of the one in the more hunched pose as some of them look dodgy so that may reduce the overall number. I'll want to wait 'til I've got daylight on my side to check those. Some of the plaits for the more upright pose might break when removing them from the tab but that's something we can be more flexible on. I'll wait 'til I get some glue then get to work on them. What was missing? The ponytails I wouldn’t even attempt as I failed every time I tried to remove them? I am surprised that I had an over 50% failure on the bows and arrows? It didn’t seem that many. The components are ultra thin The bows are great. It's the arrow hands for one pose that are the problem. There's easily 20-30 bows and most are in good condition but there's only 16 arrow hands (and 8 or more of those might be duds). I suspect it was mainly arrows that went missing on your floor.
|
|
|
Post by Admin on Feb 7, 2024 21:55:30 GMT
I will look at the files when I get back but the supported version was like Titan Forge a complete forest of supports
|
|
|
Post by Admin on Feb 7, 2024 21:58:36 GMT
Which of the 3 plates is causing the problems
|
|
|
Post by cthulhu on Feb 8, 2024 17:40:39 GMT
The heresy lab all need raising up from the plate, probably best to do bodies on one and bows and arrows on a separate plate. Really like the other minions biput again probably bed5 as two separate plates
|
|
|
Post by Admin on Feb 8, 2024 20:55:00 GMT
OK will do ghe Heresy that way
|
|
|
Post by Admin on Feb 15, 2024 0:42:08 GMT
|
|
|
Post by cthulhu on Feb 15, 2024 12:51:00 GMT
Why can’t 5hey make easy to print and paint versions🤣😂
|
|
|
Post by Admin on Feb 15, 2024 20:40:19 GMT
Just brought the Lynx file and built a plate.
it's a 2-part kit (Lynx & rider legs + upper body with bow, arrow and cape) and I used the presupported version. Don't know until test printed if the bow will require additional supports.
There's 4 Lynx per plate and it will need bases for the Lynx rear feet to be glued / pinned to.
Print time is about 3 hours a plate so's I don't know how many the club army needs. I was thinking 2 units but I've no idea what unit size you intend to run with and how that fits with the model v movement tray foot print.
|
|
|
Post by Admin on Feb 15, 2024 20:41:51 GMT
Why can’t they make easy to print and paint versions🤣😂 Shouldn't be a problem Balgin can paint them but I would like one for my one pleasure
|
|
|
Post by Admin on Feb 15, 2024 20:49:44 GMT
|
|